CVE & CISA-KEV Catalog

395,283 CVEs1,715 actively exploited (KEV)
Active:
  • CVSS 8.4 v3·EPSS -·No fix yet

    In multiple locations, there is a possible use-after-free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

    Published 2026-09-15

  • CVSS 6.5 v3·EPSS 0.2%·Fix available

    Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Locking vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to filesystem access for attacker.

    Published 2026-09-07

  • CVSS 5.9 v4·EPSS 0.1%·No fix yet

    OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0.

    Published 2026-08-24

  • CVSS 5.5 v3·EPSS 0.4%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the ov

    Published 2026-08-07

  • CVSS 8.8 v3·EPSS 0.2%·Fix available

    [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To manage the system, sysctl and platform operations are used by the control domain or a possible Xenstore domain. Some of these operations may not be executed in parallel, so a system-wide lock each is used. The way those locks are acquired is, however, not providing any fairness. Furthermore, with XSM/Flask in use, the lock acquire will, for some operations, occur ahead of any permission checking. The sysctl issue is CVE-2026-62426. The platform-op issue is CVE-2026-62427.

    Published 2026-07-28

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: gpio: eic-sprd: use raw_spinlock_t in the irq startup path sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller state through sprd_eic_update(), which takes sprd_eic->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep BUG: sleeping function

    Published 2026-07-26

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup We hit a real softlockup in an internal stress test environment. The workload was LTP memory/swap stress on a large arm64 machine, with 320 CPUs, about 1TB memory and an 8.6GB swap device. The system was under heavy load and the swap device had a large number of full clusters. The softlockup was triggered during a stress test after about 3 days. So, add periodic cond_resched() calls during large full_clusters reclaim operations to prevent softlockup issues. Detailed call trace as follow: PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7" #0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4 #1 [ffff800080183

    Published 2026-07-25

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the respo

    Published 2026-07-25

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver.

    Published 2026-07-25

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix deadlock on shared proxy's parent removal Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set") used the mutex embedded in struct gpio_shared_entry to protect the offset field which now can be modified after assignment. The critical section however is too wide and introduced a potential deadlock on the removal of the shared GPIO proxy's parent. Make the critical section shorter - only protect the offset when it's being read. While at it: mention the fact that the entry lock is now also used to protect against concurrent access to the offset field in the structure's documentation.

    Published 2026-07-24

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: fix pm_runtime leak on mutex_lock failure If tegra_i2c_mutex_lock() fails, the function returns without calling pm_runtime_put(), leaking the runtime PM reference acquired by the preceding pm_runtime_get_sync(). This prevents the device from ever entering runtime suspend. Add the missing pm_runtime_put() before returning on lock failure.

    Published 2026-07-19

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix shrinker deadlock With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see: ====================================================== WARNING: possible circular locking dependency detected 7.0.0-debug+ #43 Tainted: G W ------------------------------------------------------ kswapd0/82 is trying to acquire lock: ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm] but task is already holding lock: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}-{0:0}:

    Published 2026-07-19

  • CVSS 7.8 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sg

    Published 2026-07-19

  • CVSS 9.8 v3·EPSS 0.3%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing locking around retry adding new subreqs Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take the appropriate lock when adding extra subrequests into stream->subrequests.

    Published 2026-07-19

  • CVSS 9.8 v3·EPSS 0.3%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing barriers when accessing stream->subrequests locklessly The list of subrequests attached to stream->subrequests is accessed without locks by netfs_collect_read_results() and netfs_collect_write_results(), and then they access subreq->flags without taking a barrier after getting the subreq pointer from the list. Relatedly, the functions that build the list don't use any sort of write barrier when constructing the list to make sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if no lock is taken. Fix this by: (1) Add a new list_add_tail_release() function that uses a release barrier to set the pointer to the new member of the list. (2) Add a new list_first_entry_or_null_acq

    Published 2026-07-19

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential deadlock in write-through mode Fix netfs_advance_writethrough() to always unlock the supplied folio and to mark it dirty if it isn't yet written to the end. Unfortunately, it can't be marked for writeback until the folio is done with as that may cause a deadlock against mmapped reads and writes. Even though it has been marked dirty, premature writeback can't occur as the caller is holding both inode->i_rwsem (which will prevent concurrent truncation, fallocation, DIO and other writes) and ictx->wb_lock (which will cause flushing to wait and writeback to skip or wait). Note that this may be easier to deal with once the queuing of folios is split from the generation of subrequests.

    Published 2026-07-19

  • CVSS 7.8 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: afs: Fix the locking used by afs_get_link() The afs filesystem in the kernel doesn't do locking correctly for symbolic links. There are a number of problems: (1) It doesn't do any locking around afs_read_single() to prevent races between multiple ->get_link() calls, thereby allowing the possibility of leaks. (2) It doesn't use RCU barriering when accessing the buffer pointers during RCU pathwalk. (3) It can race with another thread updating the contents of the symlink if a third party updated it on the server. Fix this by the following means: (0) Move symlink handling into its own file as this makes it more complicated. (1) Take the validate_lock around afs_read_single() to prevent ra

    Published 2026-07-19

  • CVSS 9.8 v3·EPSS 0.4%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush().

    Published 2026-07-03

  • CVSS 8.8 v3·EPSS 0.2%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is

    Published 2026-07-02

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't call fill_pool() in early boot hardirq context When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was reported to the console. During early boot, interrupts are enabled before the scheduler is enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can fire and in the hard interrupt context handler attempt to fill the pool This can lead to a deadlock when the interrupt occurred when the interrupt hits a region which holds a lock that is required to be taken in the allocation path. Add a new can_fill_pool() helper and reorder the exception rule and forbid this scenario by excluding allocations from h

    Published 2026-07-01

  • CVSS 5.3 v3·EPSS 0.2%·Fix available

    The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer). The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), an

    Published 2026-06-29

  • CVSS 9.8 v3·EPSS 0.3%·Fix available

    concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReadWriteLock#release_write_lock does not verify that the calling thread acquired the write lock. Any thread with access to the lock object can release an active write lock held by another thread. A second writer can then enter its critical section while the first writer is still running. Concurrent::ReadWriteLock#release_read_lock also decrements the shared counter even when no read lock is held. Calling it on a fresh lock changes the counter from 0 to -1, after which normal read acquisition raises Concurrent::ResourceLimitError. This is a synchronization correctness issue in the public Concurrent::ReadWriteLock API. This vulnerability is fixed in 1.3.7.

    Published 2026-06-29

  • CVSS 9.8 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8

    Published 2026-06-29

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of

    Published 2026-06-28

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison Two concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page can trigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lock when racing with a concurrent unmap: thread#0 thread#1 -------- -------- madvise(folio, MADV_HWPOISON) -> poisons the folio successfully madvise(folio, MADV_HWPOISON) unmap(folio) try_memory_failure_hugetlb get_huge_page_for_hwpoison spin_lock_irq(&hugetlb_lock) <- held __get_huge_page_for_hwpoison hugetlb_update_hwpoison() -> MF_HUGETLB_FOLIO_PRE_POISONED goto ou

    Published 2026-06-28

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Add missing save/restore handling of LBR MSRs MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So save/restore is completely broken. Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to LBR MSRs from userspace only (as they are read-only MSRs) if LBR virtualization is enabled. Additionally, to correctly restore L1's LBRs while L2 is running, make sure the LBRs are copied from the captured VMCB01 save area in svm_copy_vmrun_state(). Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't reported as an MSR to save/restore. Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM alre

    Published 2026-06-28

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG There were multiple issues in that code. First of all the order between the reset semaphore and the mm_lock was wrong (e.g. copy_to_user) was called while holding the lock. Then we allocated memory while holding the reset semaphore which is also a pretty big bug and can deadlock. Then we used down_read_trylock() instead of waiting for the reset to finish. (cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e)

    Published 2026-06-28

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX

    Published 2026-06-28

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them.

    Published 2026-06-27

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notatio

    Published 2026-06-27

  • CVSS 5.9 v3·EPSS 0.6%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or e

    Published 2026-06-27

  • CVSS 7.0 v3·EPSS 0.2%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock.

    Published 2026-06-27

  • CVSS 7.0 v3·EPSS 0.3%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().

    Published 2026-06-27

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops DSA replaces the conduit (master) device's ethtool_ops with its own wrappers that aggregate stats from both the conduit and DSA switch ports. Taking the lock again inside the DSA wrappers causes a deadlock. Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y (which looks like some kind of testing device that auto-populates the ports of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero coverage for DSA stuff with real ops locked devs. Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from the DSA conduit ethtool wrappers.

    Published 2026-06-26

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: net: phy: don't try to setup PHY-driven SFP cages when using genphy We don't have support for PHY-driver SFP cages with the genphy code. On top of that, it was found by sashiko that running sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY probing runs under RTNL, which isn't the case for non-genphy drivers. This problem was reproduced, and does lead to a deadlock on RTNL. Before the blamed commit, the phy_sfp_probe() call was made by individual PHY drivers, so there was no way to get to the SFP probing path when using genphy. Let's therefore only run phy_sfp_probe when not using genphy.

    Published 2026-06-25

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state() iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock that the timer callback also acquires, leading to an ABBA deadlock on SMP systems. For the output timer (iptfs_timer): - iptfs_destroy_state() holds x->lock, calls hrtimer_cancel() - iptfs_delay_timer() callback takes x->lock For the drop timer (drop_timer): - iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel() - iptfs_drop_timer() callback takes drop_lock Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq context. When hrtimer_cancel() is called for a soft timer that is currently executing on another CPU, hrtimer_cancel_wait_running() spins on softirq_e

    Published 2026-06-25

  • CVSS 7.5 v3·EPSS 0.5%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with ex

    Published 2026-06-25

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: md: fix array_state=clear sysfs deadlock When "clear" is written to array_state, md_attr_store() breaks sysfs active protection so the array can delete itself from its own sysfs store method. However, md_attr_store() currently drops the mddev reference before calling sysfs_unbreak_active_protection(). Once do_md_stop(..., 0) has made the mddev eligible for delayed deletion, the temporary kobject reference taken by sysfs_break_active_protection() can become the last kobject reference protecting the md kobject. That allows sysfs_unbreak_active_protection() to drop the last kobject reference from the current sysfs writer context. kobject teardown then recurses into kernfs removal while the current sysfs node is still bein

    Published 2026-06-24

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() -> mt7925_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership.

    Published 2026-06-24

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership.

    Published 2026-06-24

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix deadlock in remain-on-channel mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel() while already holding dev->mutex. Since mt76_set_channel() also acquires dev->mutex, this results in a deadlock. Use __mt76_set_channel() instead of mt76_set_channel(). Add cancel_delayed_work_sync() for mac_work before acquiring the mutex in mt76_remain_on_channel() to prevent a secondary deadlock with the mac_work workqueue.

    Published 2026-06-24

  • CVSS 7.8 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix VM_BIND UNMAP locking Wrong argument meant that the objs involved in UNMAP ops were not always getting locked. Since _NO_SHARE objs share a common resv with the VM (which is always locked) this would only show up with non-_NO_SHARE BOs. Patchwork: https://patchwork.freedesktop.org/patch/713898/

    Published 2026-06-24

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: net: psp: check for device unregister when creating assoc psp_assoc_device_get_locked() obtains a psp_dev reference via psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU); it then acquires psd->lock and drops the reference. Before the lock is taken, psp_dev_unregister() can run to completion: take psd->lock, clear out state, unlock, drop the registration reference. The expectation is that the lock prevents device unregistration, but much like with netdevs special care has to be taken when "upgrading" a reference to a locked device. Add the missing check if device is still alive. psp_dev_is_registered() exists already but had no callers, which makes me wonder if I either forgot to add this or lost the check d

    Published 2026-06-24

  • CVSS 6.5 v3·EPSS 0.2%·Fix available

    [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To create and manage guests, domctl operations are used by the control domain, a possible Xenstore domain, or by a domain controlling a particular guest. Some of these operations may not be executed in parallel, so a system-wide lock is used. The way that lock is acquired is, however, not providing any fairness. This is CVE-2026-42489. Furthermore, with XSM/Flask in use, the lock acquire will, for some operations, occur ahead of any permission checking. This is CVE-2026-42490.

    Published 2026-06-18

  • CVSS 5.3 v3·EPSS 0.1%·Fix available

    [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To create and manage guests, domctl operations are used by the control domain, a possible Xenstore domain, or by a domain controlling a particular guest. Some of these operations may not be executed in parallel, so a system-wide lock is used. The way that lock is acquired is, however, not providing any fairness. This is CVE-2026-42489. Furthermore, with XSM/Flask in use, the lock acquire will, for some operations, occur ahead of any permission checking. This is CVE-2026-42490.

    Published 2026-06-18

  • CVSS 3.4 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure tha

    Published 2026-06-17

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix held lock freed on hfsplus_fill_super() hfsplus_fill_super() calls hfs_find_init() to initialize a search structure, which acquires tree->tree_lock. If the subsequent call to hfsplus_cat_build_key() fails, the function jumps to the out_put_root error label without releasing the lock. The later cleanup path then frees the tree data structure with the lock still held, triggering a held lock freed warning. Fix this by adding the missing hfs_find_exit(&fd) call before jumping to the out_put_root error label. This ensures that tree->tree_lock is properly released on the error path. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified tha

    Published 2026-06-10

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put() This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()"). The original patch attempted to acquire the card->controls_rwsem lock in fsl_xcvr_mode_put(). However, this function is called from the upper ALSA core function snd_ctl_elem_write(), which already holds the write lock on controls_rwsem for the whole put operation. So there is no need to simply hold the lock for fsl_xcvr_activate_ctl() again. Acquiring the read lock while holding the write lock in the same thread results in a deadlock and a hung task, as reported by Alexander Stein.

    Published 2026-06-03

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages LOCALIO is an NFS loopback mount optimization that avoids using the network for READ, WRITE and COMMIT if the NFS client and server are determined to be on the same system. But because LOCALIO is still fundamentally "just NFS loopback mount" it is susceptible to recursion deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then back into NFS via nfs_writepages. Fix LOCALIO's potential for direct reclaim deadlock by ensuring that all its page cache allocations are done from GFP_NOFS context. Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs: prevent stack overflows from page cache allocation").

    Published 2026-06-03

  • CVSS 5.5 v3·EPSS 0.1%·Fix available

    In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed a

    Published 2026-05-30

Free CVE lookup by TridentStack Control, automated patching for Windows, macOS, and Linux fleets. Learn more·Uses NVD data but is not endorsed or certified by the NVD. EPSS scores courtesy of FIRST.org (https://www.first.org/epss). Source: CISA KEV Catalog.